The Clay Loop
The loop gives you three ways into two clay concepts. Pick a shape when the problem is getting through an opening. Pick contact when the useful feature is the place where the traveler rests against the set. Pick a return pose when you want to know what the clay looks like after it has moved. Both concepts link back to these points after a relevant step.
Start with the outline
Fit an arm through the slot in Palm Passage. The silhouette shows the material gathering at the elbow, where it remains out of the way at first. The frame on the other side of the opening shows whether the hand can turn wide enough to take hold of the ledge. This first position helps the traveler think about both the shape they need now and the grip they will need afterward.
Check the point of contact
In Soft Span’s bearing study, the limb flattens against a wooden beam. A broad contact patch does more to keep the first step stable than a thin strip reaching all the way to the far table. Once the traveler can cross, another visit may help determine how much material can be lifted from the support without losing it.
Recover a useful pose
Recover the hand after the squeeze, or retrieve a piece of the bridge after crossing. Both tests give the material a visible history. A mark or ridge stays where the traveler last used the clay and can help show how to approach the next change. The returned shape needs to be easy to recognise even if it retains one part of the earlier pose.
Each stop in the loop holds a distinct mechanical question about the material.