Bearing a Step

Soft Span begins with a gap too narrow to suggest a long bridge and too wide for one step. Our first support was a roll of clay stretched from edge to edge. It looked capable of holding a traveler in the idle pose. Once the character took weight on the center, the roll bent away from its contact with the beam. We redesigned its shape around the first place where the player could test it.
Give a foot somewhere to try the support
The beam comes out a short distance from the near table. At the height of the first step a blade of cardboard hides its upper surface. We removed part of that blade so the player can see where the slab of clay widens over the wood. Our scene starts with one foot still on the table while the other rests on the support. That moment can show the shape change before the full weight of the traveler moves.
A strip that only touches one edge of the beam bends slightly as the foot approaches it. The animators keep the edge in view long enough for the player to compare it with the hand that made the shape. If nothing in the support changes, the player can continue with a useful reason for expecting the bridge to hold. If it starts to rise, they can pull their foot back and try to spread clay against the wood.
Make the contact surface easy to recognise
An early material test brightened every part of a supported shape. It made a real contact patch hard to separate from the shine of nearby clay. We kept a clear change of silhouette instead. An unsupported part retains a rounded edge. The contact patch flattens when it meets the beam and leaves a short print along the wood. That distinction is visible even when the set is shown in softer light.
The support also has a darker mass near the point where it needs to carry a foot. That does not mean the whole crossing is safe. A wider shape can still have an unsupported part farther out. We decided to keep those details in a small part of the scale drawing. Players can identify where to test next without reading a separate instruction about the material.
Recover some clay without erasing the earlier decision
The far table can hold the traveler while they come back to examine the support. Lifting an end may give them enough clay for the next shape. The remaining part can still take a hand if the earlier contact stays broad. Our first model treated recovery as a return to the starting state. The player’s earlier choice about the patch disappeared. The revised rule keeps the part that remains visible in the original position.
Test this by taking weight on the beam once, crossing and pulling a small piece away from a narrow part at the far edge. Look back from the safe table. If the rest of the support moved too, the material is too uniform to tell which part stayed fixed. The retained clay should carry a slight mark from the foot and a broader flattened region at the beam. Those are two different things a player can inspect.
Use a held frame to plan the next crossing
In the Soft Span prototype the first step leads to another decision on the next table. The seam study follows a similar idea across a pose change. We will ask reviewers whether their foot was held by the narrow strip or by the clay against the beam. If they can see enough to explain where they would take more material, the small bridge has become a useful part of the game.